-
Air-Blown Automatic Screw Feeder ZZ-GLQ-6800S
ZZ-GLQ-6800S
Send Email Details
Feeding Method: Push-type two-stage feeding
Basic Handheld Machine Operation:
1. Turn on the power, connect the air supply, and adjust the torque.
2. Pour screws into the screw hopper, ensuring the screw quantity does not exceed the height of the screw conveyor track.
3. Before tightening the screws, check if there is a screw to be tightened in the electric screwdriver chuck.
4. If there is no screw to be tightened in the electric screwdriver chuck, press the manual screw feed button to move the machine and ensure there is a screw to be tightened in the electric screwdriver chuck.
5. After ensuring the electric screwdriver adjustment button is in the screw tightening position, hold the electric screwdriver with one hand and the workpiece to be tightened with the other, align it with the screw hole, and press down to tighten the screw.
6. After the electric screwdriver reaches the preset torque and automatically stops, lift the electric screwdriver to tighten the second screw. Repeat this process to tighten all screws. -
Air-Blown Automatic Screw Feeder ZZ-GLQ-2800S
ZZ-GLQ-2800S
Send Email Details
Screw feeding method: Air blowing (ratio 1:1.3 required)
Screw chamber capacity: 500-3000pcs (depending on specific screws)
Feeding speed: 60-120pcs/min
Weight: Approx. 15kg
Hose length: 2.3 meters (other sizes can be customized)
Screw dispensing method: Double-click the electric screwdriver or press the single-stage button on the feeder. Reversing the electric screwdriver will not dispense screws.
Screw material: Unrestricted (except stainless steel) (Stainless steel requires customization based on screw and product specifications, flat surfaces only)
Screw thread: Unrestricted
Screw specifications: M2.0~M5.0, length within 20mm
Nut size: 3.0~8.0, nut diameter within ±0.15mm, length difference of 4mm allows for the use of one set of clamps; special screw clamps require custom ordering. -
Screw Machine Feeder with Counter ZZ-GLQ-1090
ZZ-GLQ-1090
Send Email Details
1. The hopper capacity is twice that of a standard screw hopper;
2. It can use special screws, including 1:1 short screws and screws with washers;
3. The feeding speed can be freely adjusted to speed up the work process;
4. The track is easy to adjust and can be freely adjusted for convenient operation;
5. It has an information output function for use with automatic machines, with a repeatability accuracy of ±0.02. -
Screw Machine Feeder with Counter ZZ-GLQ-1036
ZZ-GLQ-1036
Send Email Details
1. The hopper capacity is twice that of a standard screw hopper;
2. It can use special screws, including 1:1 short screws and screws with washers;
3. The feeding speed is freely adjustable to speed up the work process;
4. The track is easy to adjust and can be freely adjusted for convenient operation;
5. It has a signal output for use with automatic machines, with a repeatability accuracy of ±0.02. -
Air-Blown Automatic Screw Feeder ZZ-GLQ-2800
ZZ-GLQ-2800
Send Email Details
Screw compartment capacity: 500-3000pcs (depending on specific screws)
Feeding speed: 80-120pcs/min
Weight: Approx. 9.5kg
Hose length: 2.5 meters (other sizes can be customized)
Screw material: Unlimited
Screw thread: Unlimited
Screw size: M2.0-M5.0
More stable performance, lower failure rate, high production efficiency, 1 machine replaces 3 people
The RC-2800 is an air-blowing feeder sold by Ruichi Automation Equipment Co., Ltd.
Mainly used in manufacturing industries such as computers, televisions, mobile phones, toys, LED optoelectronic lighting, small household appliances, small gifts, radios, tape recorders, navigators, watches, glasses, fans, refrigerators, air conditioners, computers, telephones, etc.
